Important - Beurer HC 55 Mode D'emploi

• Do not place the device on or near wet towels after use. Risk of electric shock!
• Ensure that no hair can be directly sucked into the device. Risk of fire!

Important

• Do not jam the mains cable [9] in drawers or doors, for example.
• Untangle the mains cable [9] if it is twisted.
• Do not pull, twist or bend the mains cable [9] and do not pull or route it over/on sharp, pointed
objects or hot surfaces. Damaged or tangled mains cables increase the risk of electric shock!
Note
A slight odour initially develops after switching on the device for the first time. This is normal and not
harmful to your health. Allow the device to run for three to five minutes. After that you can use the
device as normal.
Drying the hair
> Switch on the hair dryer using the blower switch [7]
1 Gentle air flow
2 Strong air flow
> Select the heat setting using the heat setting switch [6]:
1 Low temperature
2 Medium temperature
3 High temperature
> Dry and/or style your hair as desired.
After each use/at each break, always switch off the hair dryer at the blower switch [7] (setting 0)
> For your safety, the device switches off automatically if it overheats.
> Pull the mains plug out of the socket and allow the device to cool down.
> Before switching on again, check the air outlet [2] and the filters [4, 4a] for blockage (e.g. fluff, dust and
hair that has been sucked in).
> Do not place the device on or near wet towels after use.
Note
For best results with the ion technology, use the hair dryer without an attachment.
Selecting the function
The hair dryer has a cool setting that can be selected using the cold air button [5]:
Function Description
The cold setting provides the perfect finish for styling. It cools your hair down
and adds hold for an improved result.
The cold setting can be activated at any time by pressing and holding the button [5].
Once you release the button, the device returns to the previously selected heat setting.
16