Taurus LIQUAJUICE PRO Mode D'emploi page 11

- Use the brush (M) to clean all these parts.
- Ensure pulp outlet is clear and unplug the
rubber stopper(N) (Fig 2) for easier access to
pulp outlet
- Use a damp cloth to wipe down the main body
of unity
- Caution: Before juicing ensure the rubber stop-
per (N) is firmly placed
Cleaning
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- Put the filter net into the water and use a brus-
her to clean it.
- Please use the soft damp cloth to wash the juice
container, screw, pusher and feeding tray.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of clean-
liness, its surface may degrade and inexorably
affect the duration of the appliance's useful life
and could become unsafe to use.
- Then dry all parts before its assembly and
storage.
Anomalies and repair
- Take the appliance to an authorized technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
For EU product versions and/or in case that it is
requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you wish
to dispose of the product once its working
life has ended, take it to an authorized
waste agent for the selective collection of
Waste from Electric and Electronic
Equipment (WEEE).
This apliance complies with Directive 2014/35/EU
on Low Voltage, Directive 2014/30/EU on Elec-
tromagnetic Compatibility, Directive 2011/65/EC
on the restrictions of the use of certain hazardous
substances in electrical and electronic equipment
and Directive 2009/125/EC on the eco-design
requirements for energy-related products.