Daikin BRC1E73 Mode D'emploi page 19

Selection Settings
The icon "
2
MASTER
CONTROLLED
Cool
Set to
74
Return Setting
Cool
Set to
74
Return Setting
3
Cool
Set to
74
Return Setting
English
" will flash on all remote controllers when the power is turned ON for the first time.
MASTER
CONTROLLED
● Press Mode button on the remote
controller of the indoor unit which is to
serve as the cool/heat changeover
F
master.
The remote controller for the changeover
master indoor unit is established and the
icon is no longer displayed.
MASTER
CONTROLLED
Other remote controllers in the system
F
(indoor units served by the same outdoor
unit or indoor units served by the same
branch selector unit) will now display the
icon.
MASTER
CONTROLLED
● Press Mode button on the remote
controller of the indoor unit designated
as the cool/heat changeover master (the
F
remote controller not displaying the
icon) repeatedly until the desired
MASTER
CONTROLLED
mode is selected. The display will
change to Fan, Dry, Auto, Cool, Heat
each time the button is pressed.
● Simultaneously, the other indoor units on
the system will follow suit and change
modes to refl ect the new mode selected
at the changeover master remote
controller.
17