LG G Pad II 8.0 LTE Guide De L'utilisateur page 22

Masquer les pouces Voir aussi pour G Pad II 8.0 LTE:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

While using downloaded applications, check the battery charge level.
3. Before installing an open source application and OS
WARNING
If you install and use an OS other than the one provided by the manufacturer it
may cause your device to malfunction. In addition, your device will no longer be
covered by the warranty.
To protect your device and personal data, only download applications from
trusted sources, such as Play Store™. If there are improperly installed
applications on your device, the device may not work normally or a serious error
may occur. You must uninstall those applications and all associated data and
settings from the device.
4. Using the Hard Reset (Factory Reset)
If your device does not restore to its original condition, use a Hard Reset (Factory Reset)
to initialise it.
1
Turn the power off.
2
Press and hold the Power/Lock Key + Volume Down Key on the right side of the
device until the LG logo is displayed.
3
Briefly release only the Power/Lock Key when the LG logo is displayed.
4
Immediately press and hold the Power/Lock Key again.
5
Release all keys when the Factory reset screen is displayed.
6
Press the Volume Keys to select Yes, and then press the Power/Lock Key to
perform a Hard Reset. Perform this step twice.
Important Notice
21

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

V497

Table des Matières