Replacing The Printed Circuit Board; Replacing Vacuum Motor - Windsor Versamatic plus VSP14 Mode D'emploi

Maintenance

Replacing The Printed Circuit Board

Remove Exhaust Filter Cover (6).
Remove the three screws on the vacuum tube cover
(42). Disconnect the wires and slide the circuit board
(43) out.
Install new board, attach wires and install cover.
42
43

Replacing Vacuum Motor

Remove the power head from the upper body.
Remove the dust bag housing bumper (44) and
remove the four screws on the motor cover (8).
8
Slide vacuum motor out and install new motor. Re-
assemble cover and bumper.
44
86359940 VERSAMATICPLUS 14 & 18 13