Changing Exhaust Filter; Clearing Blockages - Windsor Versamatic plus VSP14 Mode D'emploi

Maintenance
6
31
45
12

Changing Exhaust Filter

Change the exhaust filter (31) always with the motor
filter (30). Press the button and slide the exhaust
cover (6) to the side.
Never use the machine without correctly
installing the filters.

Clearing Blockages

Visually check the hose, and connecting tube (25) for
blockages. Blockages in the hose can be cleared by,
holding it upright with one hand, blocking the top and
switching on the machine. If necessary rapidly lift
your hand on and off the end of the hose.
25
Check for blockage in the swivel neck of the power
head and under the orange trap door located on the
bottom of the power head.
Check the passage between the two openings in the
power head for blockage also.
86359940 VERSAMATICPLUS 14 & 18
NOTE: Never use a stick or sharp object to clear
the hose