Comfort Temperature Settings; Switching The Comfocool On/Off (Optional); Switching The Comfohood On/Off (Optional) - Zehnder ComfoControl Luxe Manuel De L'utilisateur

Masquer les pouces Voir aussi pour ComfoControl Luxe:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2.7 Comfort temperature
settings
The comfort temperature can be set to the
required indoor temperature. Based on
this temperature, the ventilation unit will
then automatically switch to free cooling
using the bypass if required.
It is best to set the comfort
temperature to the same
temperature as the room
thermostat (of the central
heating system).
This comfort temperature can be set as
follows:
1. Press the current room temperature.
- A new settings screen will now appear
on top of the main screen.
2. Set the preferred comfort temperature
using ' ' and ' '.
3. Press '
' to return to the main screen.
Check:
2.8 Switching the ComfoCool
on/off (optional)
If an ComfoCool has been fitted, an
additional button will appear above the
comfort temperature. With this button
you can select the following ComfoCool
settings:
� ComfoCool Off: The ComfoCool will
never switch on, regardless of the
temperature.
� ComfoCool Auto: The ComfoCool will
switch on when the comfort temperature
is lower than the room temperature.
EN 28
Wednesday
3
Comf
1
2
GHE
Check:
The possible temperature setting for the
comfort temperature is reduced further
between 18ºC and 24ºC. You can now
also select 'COOL' or 'WARM'.
� COOL: The ComfoCool will cool
continuously regardless of the
comfort temperature.
- Use during the winter, when active
cooling with the ComfoCool is
preferred, or if you prefer a room
temperature below 18 ºC.
� WARM: The ComfoCool will never switch
on AND the bypass will remain
closed. The system will not attempt
any other cooling method.
- Use when the heating is set high and you
want a room temperature above 24ºC.
2.9 Switching the ComfoHood
on/off (optional)
If an ComfoHood has been fitted which
has been electrically connected to the
ventilation system, the main screen will
display an extra button. This button
allows you to operate the ComfoHood.
The ComfoHood can be switched on as
follows:
1. Press "Cooker hood".
- A new settings screen will now appear
on top of the main screen.
Cook
Check:
Wednesday
Comf
ComfoCool
Off
COOL
GHE
Wednesday
3
1
Cooker hood
2
Settings
Auto
GHE

Publicité

Table des Matières
loading

Table des Matières