Use Of The Comfocontrol Luxe - Zehnder ComfoControl Luxe Manuel De L'utilisateur

2. Use of the ComfoControl Luxe

The overview below summarizes the information that will be displayed on the CC Luxe.
If the function is not
surrounded by a ,
then it is not active
Current outside temperature
Current indoor temperature
and button for setting the
comfort temperature and
ComfoCool control.
Actual ventilation setting
(programmable
using MAN function)
Automatic (=AUTO)
or manual (=MAN)
ventilation activated
The CC Luxe display is a touch screen. All settings can be accessed, adjusted and confirmed
simply by touching the screen.
If a feature or device is not
registered, the corresponding
buttons and/or symbols will not
be shown.
While the open fire programme
is activated, or when an
ComfoCool is registered, the
supply and exhaust fan cannot
be manually switched off.
If the CC Luxe is not operated
for 30 seconds, it automatically
returns to the main screen. Your
settings will be saved.
The minimum and maximum
time delay for the (ventilation)
settings are preset in the
software.
The CC Luxe is used for the following:
- Setting the language;
EN 24
ComfoCool (=
OPEN (= )
afterheater (=
or CLOSE (= )
and/or ComfoHood (=
the air supply
Check:
System status
and error messages
Heat Recovery
system registered
)
OPEN (=
)
or CLOSE
)
the air exhaust
activated
Cooker hood
Settings
A
GHE
Valve Heat
Recovery open
External 0-10V
analog control active
or bypass CLOSED [=
- Setting the screen;
- Setting the day and time;
- Setting temperatures to be displayed.
- Reading and setting the ventilation
volume;
- Switching the supply and exhaust fan
on/off;
- Setting the comfort temperature;
- Switching the ComfoCool on/off
(optional);
- Switching the ComfoHood on/off
(optional);
- Setting a time delay for a number of
ventilation settings;
- Setting a temperature correction;
- Setting a personal
ventilation programme;
- Setting a personal
temperature programme;
- Setting the P menus
(only by the fitter).
A concise explanation of the above listing
is given in the paragraphs below.
) If the function is not
(= ) surrounded by a
then it is not active
Wednesday
Switch ComfoHood
or OFF (=light)
To screens where
other settings can be made
Switch automatic or manual
ventilation ON (=dark)
or OFF (=light)
Go to SYSTEM STATUS
screen (for system data
and error messages)
Bypass
[= ]
OPEN
]
,
Time and date
ON (=dark)