Storing The Machine; Materials Used In The Machine - RM Speedy-Rain 401 Instructions D'utilisation

HANDLING (Part II)
Handling or moving this sprinkler irrigation system is not especially difficult but does require the utmost care and
attention.

STORING THE MACHINE

If the machine is not installed immediately and needs to be stored temporarily, it must be stored in a dry
covered place.
DISPOSING OF THE COMPONENTS
The estimated working life of the machine is 8,000 work hours under normal conditions. At the end of the
machine's working life, the owner must dispose of it in full compliance with current regulations. First, all
lubricants should be emptied out and all the parts cleaned. Then the various materials making up the machine
should be separated.
Each type of material can then be disposed of in compliance with the regulations current in the country where
the machine is operated in.
ATTENTION
During disposal, observe all regulations in force in your country. Store polluting material
such as oil and solvents in metal containers.

MATERIALS USED IN THE MACHINE

MATERIAL
PAINTED METAL
HOT GALVANISED IRON
NICKEL PLATED IRON
POLYETHYLENE (PEMD)
RUBBER
CAST IRON
14/48
INSTRUCTION AND MAINTENANCE MANUAL
Chassis
Rain gun skid
Fittings
Hose
Tyres, sleeves
Gear unit box, hose slide
The drawings and the technical data are R.M. S.p.a. - © R.M. S.p.a. - Revision 16.07.2007
USE