Using The First-Time Setup Wizard; Initial Setup - HP SLC3760N Manuel De L'utilisateur

Using the First-Time Setup Wizard

Initial Setup

When turning on the TV for the first time, a wizard
scans for and automatically memorizes the available
television channels. After completing the wizard, be
sure to perform the steps for setting up the Media
function; refer to "Setting Up for the Media Function"
on page 25.
Perform the following steps before you press Power on
the remote control.
1
Insert the batteries into the remote control unit.
2
Connect the antenna or cable to the TV.
3
Plug in the AC cord to the AC outlet.
Language setting
Select from among three languages: English, French,
or Spanish.
1
Press the up arrow and down arrow buttons on the
remote control to select the desired language
listed on the screen.
2
Press OK.
Standby mode setting
1
Select the standby mode setting. The default
setting is Mode 2.
Mode 1: Starting TV is quick from standby.
■
Mode 2: Power consumption is low when in
■
standby.
2
Press OK.
Antenna setting
1
Press the left arrow and right arrow buttons on the
remote control to select Air or Cable.
2
Press OK.
Channel search
Channel search automatically searches for a signal
from all available channels.
1
Press the left arrow and right arrow buttons on the
remote control to select Yes or No for Air Analog
& Digital, and then press the down arrow button
to move down.
2
Press the left arrow and right arrow buttons on the
remote control to select Yes or No for Cable
Analog, and then press the down arrow button to
move down.
3
Press the left arrow and right arrow buttons on the
remote control to select Yes or No for Cable
Analog & Digital, and then press the down arrow
button to move down.
4
Select Search Start, and then press OK.
Example
[ Setup ... CH Setup ... CH Search ]
MENU
ANALOG Air [ 25 ]
[ Setup ... CH Setup ... CH Search ]
MENU
DIGITAL Air [ 25 ]
[ Setup ... CH Setup ... CH Search ]
MENU
DIGITAL Cable [ 25 ]
Air
Audio
Using the First-Time Setup Wizard
Found [ 20 ]
Found [ 20 ]
Found [ 25 ]
ANALOG
2
: MONO
23