Maintenance, Cleaning And Storage; Technical Specifications - höfats SPIN 120 Mode D'emploi

glass cylinder", "During operation", "Extinguishing".

2. Maintenance, cleaning and storage

SPIN is made of high-quality materials. In order to clean and care the
surfaces, please observe the following instructions:
When the flames are extinct, let SPIN cool off completely
before cleaning.
The glass cylinder is made of high-quality borosilicate glass and can
easily be cleaned with a soft cloth and some soap. Rinse thoroughly and
remove all soap residues before drying the glass. Soap residues can
increase the risk that soot particles set down on the glass.
For the main unit, neither strong or abrasive solvents nor scrub pads
must be used. These would attack the surface and leave scrape marks.
A wet, soft cloth with a pH-neutral cleaning agent is sufficient in order to
clean the main unit.
Always keep SPIN at a well-protected place and never expose SPIN to
harsh weather conditions.
The stainless steel refill cup be conveniently cleaned in the dishwasher.
We recommend using a washing program of min. 60°C.
3. SPIN on an increasing element
It is also possible to use SPIN with an increasing element. With this
application, SPIN can be used in increased position on the ground. The
increasing element is simply screwed between footing and main unit.
Important: a maximum of one increasing element is allowed. SPIN in
increased position must only be operated outdoors.
well-ventila-
outdoors ted rooms
in a car /
motorhome
in a tent
4. SPIN on a ground spike
• You can also use SPIN in combination with a ground spike. This turns
SPIN into an exciting fire display for your outdoor areas. Simply
unscrew the main component from the stand and screw it onto the
ground spike (without elevation mount). Please refer to the quick
guide.
• The three-part ground spike makes SPIN a versatile garden torch. The
different lengths of the three pole components (48 cm / 34 cm / 17
cm) can be used individually or in combination to create the following
overall lengths: 99 cm, 82 cm, 65 cm, 48 cm, 34 cm, 17cm.
• When paired with the ground spike, SPIN is only suitable for outdoor
use.
• It is essential to drive the ground spike deeply into the ground – we
recommend driving the spear pint at least 25cm into the ground. Make
sure that the ground spike is firm and stable. The insertion depth can
vary depending on soil texture. If the soil is particularly soft & loose,
you may not be able to safely insert the ground spike. If you cannot
ensure that the ground spike will stand securely SPIN may not be
used. Always maintain the necessary safety distances from flammable
materials (see point 1.4)
• Alternatively, SPIN ground spike / SPIN torch can also be set up with
the separately available stand (Ø 230 mm, Art. No. 0007). The base of
the table variant (Ø 190 mm) is expressly not suitable for use with the
ground spike / torch. When using the stand, it must be ensured that it
is placed on a firm surface, such as a B. terrace floor or pavement is
placed.
well-ventila-
outdoors ted rooms
in a car /
motorhome
in a tent
5. SPIN in hanger
SPIN can be transformed into a beautifully shaped hanging lantern with
the help of the hanger. This allows SPIN to be suspended freely from
a ceiling or similar. To do this, screw the main body, without the foot
part, into the frame of the hanger. AN ELEVATION MUST NOT BE USED
UNDER ANY CIRCUMSTANCES. Observe the brief instructions for SPIN
hanging fire.
• SPIN can be adjusted to the desired height with the help of the
continuously adjustable stainless steel cable. To do this, simply open
the Allen screw on the clamping element. When retightening the
screw, make sure that there is sufficient clamping force. The easiest
way to do this is to pull on the lower end of the frame.
• Make sure that the stainless steel cable is not kinked, otherwise
permanent deformation may occur.
• The height adjustment of SPIN hanging fire must always be done
without the glass tube.
• To securely fasten SPIN hanging fire, use the screw with dowel
included in the scope of delivery. SPIN hanging fire may only be fixed
to solid concrete ceilings or solid wood, this is the only way to ensure
sufficient strength of the screw. The screw must withstand a tensile
force of min. 60 kg. If in doubt, consult an appropriate specialist for
installation.
• Fastening to a concrete substrate: For secure fastening to a concrete
substrate, pre-drill at the intended location with Ø 10 x 60 mm. Use the
dowel included in the scope of delivery to fasten the screw.
• Fastening to a wooden base: For secure fastening to a solid wooden
base, pre-drill with Ø 4 x 60 mm at the intended location.
• The hanging fire can be unhooked from the bracket and/or the ceiling
screw. Only move the hanging fire when it is cold, at room temperature.
• When attaching the fastening hoe, make sure that there is sufficient
safety distance to flammable, easily combustible materials. A safety
distance of min. 60 cm in all directions must be ensured.
• SPIN hanging fire must only be done when cold, never move the product
when hot. The glass tube must always be removed when hanging and
suspending, the glass tube could fall down and break.
• SPIN hanging fire may only be installed in wind-protected locations to
prevent uncontrolled swinging of SPIN. Depending on the length of the
steel cable, the pendulum swing can be very large.
• When operating SPIN hanging fire, always ensure that no pendulum
movement occurs. If a pendulum movement should occur, SPIN
hanging fire must be returned to the rest position as quickly as
possible. Always use heat-resistant gloves, there is a risk of burns
from hot components.
• Make sure that all components are securely fastened before ignition
and commissioning. The wing body must be firmly screwed onto the
bracket.
well-ventila-
outdoors ted rooms
in a car /
motorhome
in a tent
6. Warranty
All höfats products undergo – from their conception to their series
production – many phases of planning and testing. In manufacturing and
assembly, only high-quality materials as well as most modern methods
as regards quality control and assurance are applied. Only thus we can
make sure that höfats customers get the quality expected and can take
pleasure in our products for years. In case one article should – contrary
to expectations – not meet these requirements, the following warranty
periods are applicable:
2 years
Precondition therefore is that the article was assembled and used
according to the instructions annexed. höfats reserves the right to
demand a proof of purchase (Please keep the original proof of purchase
or the original invoice in a safe place).
The warranty is valid only upon presentation of the proof of purchase
consisting of original invoice or sales slip indicating the date of purchase,
dealer's name, model and serial no. of the product. Company reserves
the right to refuse warranty if this information has been removed or
changed after the original purchase of the product. The limited warranty
is only applicable for repair works or replacement of integral parts that
prove to be defective under normal conditions of use. If höfats confirms
the defective condition and accepts the reclamation, höfats will either
repair the defective part(s) free of charge or replace it / them. In case
you have to send in a defective part, the shipping fees to höfats have to
be paid in advance so that höfats can return the repaired resp. new part
to you free of charge. The Warranty is not applicable when the defect
is caused by improper use as determined by the company personnel."
The Warranty is not applicable when there is modification or alteration of
any nature made to the electrical circuitry or any part that is physically
constructing or surrounding the set.

8. Technical specifications

SPIN 120 SPIN 120 TORCH SPIN 120 HANGING FIRE SPIN 90
Art. No. 00019, 00021, 00017 00297
00024, 090101
fuel höfats höfats höfats Combustion gel
Combustion gel Combustion gel
Max. capacity 500 ml 500 ml 500 ml
burning time 60 - 80 min 60 - 80 min 60 - 80 min
Dimensions 23 x 23 x 54 cm 12 x12 x 153 cm 79 x 16 x 8,5 cm, 60 – 120
cm Pitch
mass 4,6 kg 1,9 kg 2,5 kg
minimum safety 60 cm 60 cm 60cm
distance
ENGLISH
This limited warranty does not cover malfunction or operating difficulties
due to accident, misusage, modification, misapplication, force majeure,
willful damage, false assembly resp. maintenance or false service.
Moreover, this warranty becomes void in case normal maintenance
and cleaning works are not carried out regularly. Any deterioration of
condition or damage due to extreme weather conditions such as hail,
earthquakes or hurricanes as well as changes in color due to direct
sunlight or contact with chemicals is also not covered by this warranty.
Applicable and implied warranties as to marketability and suitability
are restricted to the periods explicitly stated in this warranty. In some
judicial districts, such restrictions as to warranty periods of an implied
warranty are not permitted so that these restrictions as to validity
might not affect you. However, höfats does not assume liability for any
particular, indirect or consequential damage. In some judicial districts,
an exclusion or restriction regarding collateral or consequential damage
is not permissible. In such case, this restriction or exclusion might not
apply to you.
No liability can be assumed for damages caused by the use and operation
of höfats products as regards third-party products in case of improper
handling, assembly or – for example – mishaps.
höfats does not entitle any persons or companies to assume any liabilities
or warranties in the company's name as regards the sale, assembly, use,
deconstruction, return or operation of its products. Such representations
are not binding for höfats.
7. Disposal
Your new device has been protected by its packaging on the way to you.
All materials used are environmentally compatible and recyclable.
Please assist in disposing the materials in an environment-friendly way.
Both your distributor and your local disposal facility will inform you about
environment-friendly disposal channels.
Do not hand over packaging material and parts thereof to
children.
Risk of suffocation due to foils and other packaging material.
Old devices are no worthless waste. By means of an environment-
friendly disposal, valuable raw materials can be regained. Find out
with your municipal or local administrations about possibilities of an
environmentally compatible and proper disposal of your old device.
Combustion gel and combustion gel remains must not be disposed by
wastewater.
Dispose of the empty and used combustion gel cans at your local special
waste collection point (recycling center).
SPIN 90 TORCH SPIN 90 HANGING FIRE
00041, 00043, 00036 00301
00046, 00221
höfats höfats höfats Combustion gel
Combustion gel Combustion gel
225 ml 225 ml 225 ml
50 – 60 min 50 – 60 min 50 – 60 min
19,5 x 19,5 x 40 9 x 9 x 140 cm 60 x 13 x 6,5 cm, 60 –
cm 120 cm Pitch
3 kg 1,35 kg 1,2 kg
60 cm 60 cm 60cm
16 17