Drip Tray; Glass Shelf; Door Sealing - Norcold Polar 10 Serie Manuel D'utilisation

Masquer les pouces Voir aussi pour Polar 10 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Drip tray:

To remove and clean the drip tray:
NOTICE
Do not wash the drip tray in a dishwasher. The drip tray is not dishwasher safe.
- Pull the drip tray out of the drain hose.
- Pull the drip tray forward to remove from the slots in the refrigerator cabinet.
- Clean the drip tray.
- Push the drip tray back into the slots in the refrigerator cabinet.
- Push the drip tray back into the drain hose.

Glass shelf:

To clean the glass shelf:
- Remove the screw and grommet that is in front of the glass shelf.
- Pull the glass shelf forward out of the slot
- After cleaning, push the glass shelf fully into the slot.
- Put the screw and grommet back in the orignial position.

Door Sealing

Check the seal of the doors.
If either door does not seal correctly, excess frost will collect inside the refrigerator. Make sure the doors seal correctly (See Art 00980):
- Close each door on a piece of paper that is about the size and thickness of a dollar bill.
- Gently pull the paper.
- You should feel a slight drag between the gasket and the cabinet.
- Do this on all four sides of the door.
- If you do not feel a slight drag on the paper, the door does not seal correctly.
- Have your dealer or an authorized Norcold Service Center correct the seal of the door.
Owner's Manual 12
Art 00980

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Polar n10lxPolar na10lx

Table des Matières