Warnings; Cautions - IDEAL 61-517 GFCI Manuel D'utilisation Et De Sécurité

Arc Flash and Shock Hazard, Proper PPE Required. Follow all safety
procedures, wear proper PPE in accordance to NFPA 70E and follow
the guidelines below and the instructions in this manual when
operating the meter. Failure to comply can result in serious injury
or death.
• Have the Meter serviced only by qualified service personnel.
• Do not use the Meter around explosive gas, dust, or vapor, or
during electrical storms, or in wet environments.
• Do not apply more than the rated voltage, as marked on the
Meter, between the terminals or between any terminal and
earth ground.
• To avoid false readings that can lead to electrical shock
and injury, replace the batteries as soon as the low battery
indicator (
• Voltages exceeding 30VAC or 60VDC pose a shock hazard
so use caution.
• Do not work alone so that assistance can be rendered in an
emergency.
• Use extreme caution when working around bare conductors.
Contact with the conductor could result in electric shock.
• Adhere to local and national safety codes. Individual
protective equipment must be used to prevent shock and arc
blast injury where hazardous live conductors are exposed.
• Never operate the Meter with the back cover removed or the
case open.
• Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Meter damage, equipment under test damage or data loss can occur if
the following guidelines are not adhered to.
• Clean the case and accessories with a damp cloth and mild
detergents only. Do not use abrasives or solvents. Make sure
the meter is completely dry before use.
6
WARNING
) appears.
CAUTION