Doyon WM45 Mode D'emploi page 10

By pressing the STOP/C key, will appear the number of times the electrovalve has been opened (see fig.
10), divided into 10.
Pressing the STOP/C key, the normal visualization is restored.
NOTE: The totalizators go automatically to zero when they reach respectively 999,9m³ and 9990 times
(visualized: 999).
•
To prevent from modifying the recipes, it is possible to protect the setting and modification
operations, pressing the P key for 5"; the display indicates the wording as in Figure 11, in which the
code 147 has to be entered.
Then, pressing the P key, the display indicates the wording as in Figure 12:
Pressing the 1 key, the wording diS appears, indicating that the recipe programming is disable; pressing
the 2 key, the wording Abi appears, indicating that the recipe programming is enabled.
6
E L. U
2 0 3
Figure –10
C o d E
P r G
Figure -11
r E c i
A b i
Figure -12