General Information About Radio Operation; Technical Specifications - HomeMatic IP HmIP-FWI Notice D'installation Et Mode D'emploi

9

General information about radio operation

Radio transmission is performed on a non-exclusive transmission path,
which means that there is a possibility of interference occurring. Inter-
ference can also be caused by switching operations, electrical motors or
defective electrical devices.
The transmission range within buildings can differ greatly from that
available in the open air. Besides the transmitting power and the re-
ception characteristics of the receiver, environmental factors such
as humidity in the vicinity have an important role to play, as do on-
site structural/screening conditions.
eQ-3 AG, Maiburger Straße 29, 26789 Leer, Germany hereby declares
that the radio equipment type Homematic IP HmIP-FWI is compliant with
Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at www.homematic-ip.com
10

Technical specifications

Device short description:
Supply voltage:
Current consumption:
Power consumption
Standby:
Open-drain output
Max. switching voltage:
Max. current:
Cable type and cross section:
Installation:
Protection rating:
General information about radio operation
HmIP-FWI
5 – 12 VDC
40 mA max.
60 mW
20 V
200 mA
0.2 – 1.5 mm
only in switch boxes (device boxes) in
accordance with DIN 49073-1 or sur-
face-mounting boxes in accordance
with DIN 60670-1 (e.g. Abox 025 or
Abox 040)
IP20
31