Function And Device Overview - HomeMatic IP HmIP-FWI Notice D'installation Et Mode D'emploi

The device must only be operated within residential buildings.
Using the device for any purpose other than that described in this
operating manual does not fall within the scope of intended use and
will invalidate any warranty or liability.
3

Function and device overview

With the Homematic IP Wiegand interface, you can integrate devices that
have a Wiegand interface (e.g. a code lock, fingerprint or card/transpond-
er reader) into your Homematic IP smart home system. You then have the
option of combining Wiegand devices with Homematic IP devices via the
free WebUI user interface.
Any 20 Wiegand codes can be transmitted to the Wiegand interface.
The Wiegand interface has 8 virtual input channels that can be individu-
ally linked to the Wiegand codes. A Wiegand code can then control one
or more virtual input channels and thus trigger one or more actions (e.g.
switching a switch actuator, opening a door via a door lock drive or acti-
vating/deactivating alarm functions).
In addition to the Wiegand inputs, the device also features an input for
connecting a doorbell button, an input for connecting a tamper contact
and an open-collector switching output.
Device overview (see figure 1):
(A) System button (pairing button and LED)
(B) Supply voltage
(C) Connecting terminal for open-drain output
(D) Connecting terminal for Wiegand interface
(E) Antenna
(F) Connecting terminal for tamper contact
(G Connecting terminal for doorbell button
Function and device overview
23