HomeMatic IP HmIP-FWI Notice D'installation Et Mode D'emploi page 27

You can connect the device either to the access point or to the
Homematic Central Control Unit CCU3. For detailed information,
please refer to the Homematic IP User Guide, available for download
in the download area of www.homematic-ip.com.
To integrate the device into your system and enable it to communicate
with other Homematic IP devices, you must first add the device to your
Homematic IP access point.
To add the device, please proceed as follows:
• Open the Homematic IP app on your smartphone.
Select the menu item "Add device".
•
• After installation, the pairing mode remains activated for 3 min-
utes (see figure 5).
You can manually start the pairing mode for another 3 minutes by
briefly pressing the system button (A) (see fig. 5).
• Your device will automatically appear in the Homematic IP app.
• To confirm, enter the last four digits of the device number (SG-
TIN) in your app or scan the QR code. The device number can be
found on the sticker supplied or attached to the device.
• Wait until pairing is completed.
• If pairing was successful, the LED (A) lights up green. The device
is now ready for use.
• If the LED lights up red, please try again.
• Select in which application the device will be used.
• In the app, give the device a name and allocate it to a room.
• After installation, close the flush-mounted box with a suitable
cover or a masking frame for flush-mounted boxes (see figure 6).
Start-up
27