Safety Information For Brushcutter; Assembly - Sabo MS-36 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
Service
·
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
INSTRUCTION
·
Read the instructions carefully. Familiarise yourself with the operating elements and correct machine operation.
·
Never allow persons who are not familiar with these instructions to use the device. Regional regulations may restrict the age of the user.
·
Remember that the operator or user is responsible for accidents with or dangers to other persons or their property.
PREPARATION
·
Check the battery for signs of damage and ageing before use. If the battery is damaged during use, switch off the device and immediately remove the battery. Do not use the device if
the battery is damaged or worn.
·
Before use, always perform a visual inspection in order to check that none of the protective covers or panels is damaged, missing or incorrectly fitted.
Never use the machine while persons, particularly children, or animals are nearby.
OPERATION
·
Keep mains cables away from cutting tools.
·
When using this machine, always wear ear protectors, eye protectors, long trousers and sturdy shoes.
·
If applicable, wear eye and ear protection.
·
Do not use the device in bad weather if there is any risk of a lightning strike.
·
Do not use expose the machine to rain when in use.
·
Only use the machine in daylight or good artificial light.
·
Never use the machine with defective or missing safety equipment and shields.
·
Switch on the motor only when hands and feet are away from the cutting tool.
·
Always remove the battery from the device
when the machine is left unsupervised.
o
before you remove a blockage.
o
before you inspect or clean the machine or carry out work on it.
o
to inspect the device after strong contact with an object
o
if the machine starts to vibrate strangely (immediate inspection necessary).
o
·
Prevent injuries to feet and hands from the cutting tool.
·
Always ensure that the fan openings are free from deposits.
CARE AND STORAGE
·
Always remove the battery from the device.
·
Use only spare parts and accessories that are recommended by the manufacturer.
·
Regularly inspect and maintain the machine. Have the machine repaired by an authorised workshop.
·
Keep the machine out of reach of children when it is not being used.

7 SAFETY INFORMATION FOR BRUSHCUTTER

·
This device may be used by children aged 8 and above and by persons with impaired physical, sensory or mental aptitude or lack of experience and knowledge if they are supervised or
have received instructions about the safe use of the device and the related dangers.
·
Children must not play with the device.
·
Cleaning and maintenance may not be performed by unsupervised children.
·
The battery must be removed from the device before it is disposed of.
·
The battery must be disposed of safely.
·
Avoid unergonomic postures. Make sure you have a firm footing and keep your balance at all times. This allows you to control the power tool better in unexpected situations.
·
Wear clothing appropriate for the conditions. Do not wear loose-fitting clothing or jewellery. Keep hair, clothing and gloves away from moving parts. Loose-fitting clothing, jewellery and
long hair can be trapped in moving parts.
·
This device is not suitable for use by persons (including children) with impaired physical, sensory or mental aptitude or lack of experience and knowledge unless they are supervised or
have been instructed in the use of the device by a person responsible for their safety.
·
Children should be supervised in order to ensure they do play with the device.
·
If a metal cutting attachment is mounted: Fit the transport guard.
KEEP THESE INSTRUCTIONS SAFE. READ THEM REGULARLY AND EXPLAIN THEM TO ANYONE WHO MAY WANT TO USE THIS DEVICE. IF YOU LEND THIS DEIVCE, PLEASE
ALSO PASS ON THESE INSTRUCTIONS.

8 ASSEMBLY

UNPACKING
This product must be assembled before the first use.
·
Carefully remove the product and accessories from the box. Check whether all the objects listed in the packing list are included. In some cases these may already be pre-fitted on the
device in the specified position. In these cases the disassembly and reassembly of the unit is necessary.
WARNING
Do not use this product if parts listed on the packing list are already fitted to your product when you unpack it. The parts on this list have not been prefitted to the product by the
manufacturer and must be fitted by the customer. The use of a product that has not been correctly fitted can lead to serious injuries.
32

Publicité

Table des Matières
loading

Table des Matières