ETNA EEK262VA Mode D'emploi page 80

USE
EN 14
Attention! The thermostat must be switched to a position between
2 and 4 for the optimum internal temperature.
• When you switch the device on for the first time you must first allow
it to cool for 24 hours before you cool it to the desired temperature.
• During these 24 hours do not open the door frequently and do not
place food in the device.
• If the device is switched off or is no longer connected to the power
supply you must wait for a minimum of 5 minutes before you
connect the device again. This prevents damage to the compressor.