ETNA EEK262VA Mode D'emploi page 71

Masquer les pouces Voir aussi pour EEK262VA:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SAFETY
• WARNING! Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by
the manufacturer.
• WARNING! Do not damage the refrigerant circuit.
• WARNING! Do not use electrical appliances inside the food
storage compartments of the appliance, unless they are of
the type recommended by the manufacturer.
• WARNING! Do not use water spray and steam to clean the
appliance.
• WARNING! Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
• WARNING! Do not store explosive substances such as
aerosol cans with a flammable propellant in this appliance.
• WARNING! If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Installation
• WARNING! Only a qualified person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
• Always be careful when you move the appliance because it
is heavy. Always wear safety gloves.
• Make sure the air can circulate around the appliance.
• Wait at least 4 hours before connecting the appliance to
the power supply. This is to allow the oil to flow back in the
compressor.
• Do not install the appliance close to radiators or cookers,
oven or hobs.
EN 5

Publicité

Table des Matières
loading

Table des Matières