Using The Thermostat; Basic Mode; Functions - ensto ECO16LCD Notice D'installation

GENERAL
GB
ECO16LCD is a timed combination thermostat with a display for controlling the fl oor heating.
The thermostat enables to gain savings in energy consumption without having to decrease in
living comfort.
The device must only be installed by a qualifi ed person. Switch off the power before installation
and maintenance. Keep the operation instruction for future use.

USING THE THERMOSTAT

BASIC MODE

ECO16LCD is equipped with a display and push buttons. The button above the display is used to
turn on and off the thermostat. After switching on the thermostat the heating is on for approx.
1 hour during which time the thermostat adapts to the current conditions. The present mode
of the thermostat is shown on the display and the functions can be changed using the control
buttons below the display.
and buttons are used to move up and down in the menus and setting options.
OK button is used to enter and exit the menus.
Display symbols in the basic mode
Comfort
temperature
symbol
Heat
symbol

FUNCTIONS

The thermostat can be used in two standard functions: standard temperature and weekclock.
Exchange between these two functions takes place by pushing the OK button in the basic
mode.
The thermostat has also a third function: external temperature change. This function bypasses
the standard functions.
Button lock
Economy
symbol
temperature
symbol
Weekday
Time
Temperature unit
˚
C
Set temperature
13