Miele STB 101 Turbo Mini Mode D'emploi page 72

en-US
References to illustrations
The illustrations referred to in the text
are shown on the fold-out pages at
the end of these Operating Instruc-
tions.
Handheld Turbobrush features
The handheld Turbobrush is operated
by the suction power of the vacuum
cleaner. It has a rotating roller brush
which is very effective at vacuuming up
thread, hair and fluff.
Recommended use (Fig. 01)
When using the handheld Turbo-
brush, please also observe the IM-
PORTANT SAFETY INSTRUCTIONS
in your vacuum cleaner instruction
manual.
This handheld Turbobrush is particularly
suitable for vacuuming upholstery, mat-
tresses, car seats and carpeted stairs.
It is also important to observe the
flooring manufacturer's cleaning and
care instructions.
Fitting the handheld Turbo-
brush
 Connect the handheld Turbobrush to
the handle or suction wand on your
vacuum cleaner depending on how
you wish to use it.
72
Using the handheld Turbo-
brush
 To achieve the best effect, pass the
handheld Turbobrush slowly back-
wards and forwards over the surface
being vacuumed.
Maintenance
Always turn off the vacuum

cleaner and unplug it before cleaning
or servicing the Turbobrush.
Removing threads and hairs
(Fig. 02 - 04)
 With a pair of scissors (Fig. 02)), cut
any threads or hairs that have be-
come entangled on the roller brush.
Then run the vacuum cleaner to vac-
uum up the bits.
For more tangles or blockages inside
the handheld Turbobrush, the cover can
be opened. Any large particles can then
be easily removed (Fig. 03).
 Twist the connector until the release
button is located in the center of the
slot .
 Then press release button  and pull
the connector away from the hand-
held Turbobrush .
 Open up the brush compartment as
far as you can and then remove any
stubborn soiling from the compart-
ment interior and from the roller brush
(Fig. 04).
 Finally close the cover to the brush
compartment and push the connector
back into position over the release
button.