Setting The Menu Language; Setting The Angle Icon Display; Setting The Aspect Ratio; Setting Parental Lock - Pioneer AVH-X7700BT Mode D'emploi

Setting up the video player
2 Touch [DVD/DivX Setup].
3 Touch [Audio Language].
The pop-up menu appears.
4 Touch the desired language.
When you select "Others", a language code input screen is
shown. Input the four-digit code of the desired language then
touch .
 If the selected language is not available, the lan-
guage specified on the disc is displayed.
 You can also switch the audio language by
touching the switch audio languages key during
playback.
 The setting made here will not be affected even if
the audio language is switched during playback
using the switch audio languages key.

Setting the menu language

You can set the preferred language in which the menus recorded
on a disc are displayed.
1 Display the "Video Setup" screen.
2 Touch [DVD/DivX Setup].
3 Touch [Menu Language].
The pop-up menu appears.
4 Touch the desired language.
When you select "Others", a language code input screen is
shown. Input the four-digit code of the desired language then
touch .
 If the selected language is not available, the lan-
guage specified on the disc is displayed.

Setting the angle icon display

The angle icon can be set so it appears on scenes where the
angle can be switched.
p This setting is available when the selected source is "Disc",
"CD", "Video CD" or "DVD".
1 Display the "Video Setup" screen.
2 Touch [DVD/DivX Setup].
3 Touch [Multi Angle] repeatedly until the
desired setting appears.
●
On (default): Turns the multi-angle setting on.
●
Off: Turns the multi-angle setting off.

Setting the aspect ratio

There are two kinds of displays. A wide screen display has a
width-to-height ratio (TV aspect) of 16:9, while a regular display
has a TV aspect of 4:3. If you use a regular rear display with a TV
aspect of 4:3, you can set the aspect ratio suitable for your rear
display. (We recommend use of this function only when you want
to fit the aspect ratio to the rear display.)
p When using a regular display, select either "Letter Box"
or "Pan Scan". Selecting "16:9" may result in an unnatural
image.
p If you select the TV aspect ratio, this product's display will
change to the same setting.
p This setting is available when the selected source is "Disc",
"CD", "Video CD" or "DVD".
1 Display the "Video Setup" screen.
2 Touch [DVD/DivX Setup].
3 Touch [TV Aspect].
The pop-up menu appears.
4 Touch the item you want to set.
●
16:9 (default): Displays the wide screen image (16:9) as it is
(initial setting).
●
Letter Box: Makes the image in the shape of a letterbox with
black bands on the top and bottom of the screen.
●
Pan Scan: Cuts the image short on the right and left sides of
the screen.
 When playing discs that do not have a panscan
system, the disc is played back with "Letter Box"
even if you select the "Pan Scan" setting. Confirm
whether the disc package bears the
 The TV aspect ratio cannot be changed for some
discs. For details, refer to the disc's instructions.

Setting parental lock

Some DVD-Video discs let you use parental lock to set restric-
tions so that children cannot watch violent or adult-oriented
scenes. You can set the parental lock level in steps as desired.
p When you set a parental lock level and then play a disc fea-
turing parental lock, code number input indications may be
displayed. In this case, playback will begin when the correct
code number is input.
p This setting is available when the selected source is "Disc",
"CD", "Video CD" or "DVD".
Setting the code number and level
When you first use this function, register your code number.
If you do not register a code number, the parental lock will not
operate.
1 Display the "Video Setup" screen.
2 Touch [DVD/DivX Setup].
3 Touch [Parental].
The "Parental" screen appears.
4 Touch [0] to [9] to input a four-digit code
number.
5 Touch the following key.
Registers the code number, and you can now
set the level.
mark.
41