Radio; Starting Procedure; Storing The Strongest Broadcast Frequencies; Tuning Into Strong Frequencies - Pioneer AVH-X7700BT Mode D'emploi

Radio

Displays the preset channel list.
Select an item on the list ("1" to "6")
to switch to the preset channel.
Selects the FM1, FM2, FM3
or AM band.
Radio
1 21 48
6/10
2
FM1 AM
Abcdefghi
3
Abcdefghi
4
Abcdefghi
5
000.00
6
MHz
Performs manual tuning.
Performs seek tuning or
HOLD
non stop seek tuning.
Releasing the key in a few seconds, skips
to the nearest station from the current
frequency.
Keeping holding the key for a long
seconds, performs non stop seek tuning.
Recalls the preset channel
stored to a key from memory.
Stores the current broadcast
HOLD
frequency to a key.
Stores song information to an iPod.
 Storing song information to an iPod (iTunes
Tagging) on page 43
p By pressing or , you can also switch the preset
channels.
p By pressing and hold or and release, you can
also perform seek tuning.
p By keeping touching and holding or
perform non stop seek tuning. Touch again to cancel.

Starting procedure

1 Display the "AV source selection" screen.
2 Touch [Radio].
The "Radio" screen appears.
Storing the strongest broadcast
frequencies
The BSM (best stations memory) function automatically stores
the six strongest broadcast frequencies under the preset tuning
keys "1" to "6".
p Storing broadcast frequencies with BSM may replace those
you have already saved.
p Previously stored broadcast frequencies may remain stored
if the number of frequencies stored has not reached the
limit.
1 Touch .
2 Touch to begin a search.
While the message is displayed, the six strongest broadcast
frequencies will be stored under the preset tuning keys in order
of their signal strength.
 If you touch [Cancel], the storage process is
canceled.

Tuning into strong frequencies

p You can use this function when "Radio" is selected as the
source.
Local seek tuning allows you to only tune into those radio sta-
tions with sufficiently strong signals.
1 Display the "System" setting screen.
2 Touch [AV Source Settings].
3 Touch [Radio settings].
, you can
4 Touch [Local].
5 Touch the item you want to set.
●
Off (default):
Turns the seek tuning setting off.
●
Level1 to Level4:
Sets the level of sensitivity for FM to Level1 to Level4 (for
AM Level1 or Level2).
p The FM "Level4" (AM "Level2") setting allows reception of
only stations with the strongest signals.
19