LEGRAND MP6-DMX3 Mode D'emploi page 59

By pushing these buttons it is possible to access the setting screen:
disable
button
parameter
setting
"abort"
It's possible to adjust the settings by pushing the + or – buttons. Automatically the set
value will be shown in absolute value and part of the rated value.
"Cancel": it's possible to go back to the setting page deleting all the settings done.
"Confirm" it's possible to go back to the setting page confirming all the settings done.
For the data saving procedure see page 50.
Protection unit MP6-Megabreak
enable
button
delay
setting
"confirm"
59
®