Frequently Asked Questions And Other Related Information; Service And Support - Eminent EM6104 Mode D'emploi

Information:
Maintenance:
Basic Display menu
Name:
Time/Name OSD: It is possible to change the OSD text which is shown in the
15.0 Frequently Asked Questions and other
related information
The latest Frequently asked questions for your product can be found on the support
page of your product. Eminent will update these pages frequently to assure you have
the most recent information. Visit www.eminent-online.com for more information about
your product.

16.0 Service and support

This users manual has been carefully written by Eminent's technical experts. If you
have problems installing or using the product, please fill out the support form at the
website www.eminent-online.com/support.
You can also contact us by phone. Below you will find a list with phone numbers for
each supported country.
Country
Belgium (Dutch)
View the software status, MAC Address and serial number of the
surveillance recorder at 'Device'. Also, the network data can be
shown at 'Network'. At 'Record', you can see the amount of disk
space the recording (s) will consume per hour. Also, the
Resolution, Frame Rate and Quality are shown. Note: The higher
the Resolution, Frame Rate and Quality, the more disk space is
needed!
Perform a firmware update, reset the device back to factory
defaults or restart the device.
It is possible to change the name of the camera channel which is
shown in the camera's image. Go to 'Basic Display' and then
click the field below 'Name'. You can now change the name of the
channel below 'Name'. You can change the camera's name for
each channel.
camera's image. Go to 'Basic Display' and then click settings
below 'To/Name'. You can now change the position of the channel
number and date. You can also disable the OSD text.
Phone number
070 277 286
Rate per minute*
€0.30
28 |
ENGLISH