Setting Up Network Settings; Selecting The Screen Language - Eminent EM6104 Mode D'emploi

7. Place a mark at 'Auto update' if you want the time and date to be updated
automatically.
8. Select a time server at the 'Time server' field. You can select an online time server
which will synchronize the date and time.
9. Click 'DST'. In the following screen, you can select the daylight saving time, by
placing a mark at 'Enable'. Also, you can set the 'Offset' in hours. For example:
One hour. You can also set the starting and end date of the daylight saving time
(DST) at the 'From' and 'To' fields.
10. Click 'Apply' to save these settings.
11. Click 'OK' at the 'successfully saved' screen.
12. Click 'Exit' until you are at the main menu.

5.3 Setting up network settings

1. Click 'Advance'.
2. Click 'Network'.
3. 'Obtain an IP address automatically' and 'Obtain DNS server automatically' are
selected by default. This is the ideal setting if you have a DHCP server within your
network and you do not want to setup the network data manually.
4. If there is no DHCP active within your network, or you want to manually fill out an
IP-Address, place the mark at 'Use the following IP address' and fill out the correct
data such as 'IP address', 'Subnet mask' and 'Default gateway'. (You can use the
mouse to select and change the data). Also, fill out a correct 'Preferred' and
'Alternate DNS server'.
5. Click 'Apply' to save these settings
6. Click 'OK' at the 'successfully saved' screen.
7. Click 'Exit' until you are at the main menu.
Attention! In order to access the surveillance recorder using the Internet, make sure
you have filled out the IP-Address data correctly. If not, a connection from the Internet
may not be established.

5.4 Selecting the screen language

The on screen display and webpage of the surveillance recorder are available in
several languages. This manual is based on the English language which is the default
language setting of the surveillance recorder . You can select your own language with
these instructions:
1. Click 'Basic'.
2. Select 'Language' at the right side of the screen.
3. Select your desired language from the list.
4. Click 'Apply'.
5. Click 'OK' at the 'successfully saved' screen.
6. Click 'Exit' until you are at the main menu.
10 |
ENGLISH