Cleaning The Soft Roller; Checking The Nozzle For Blockages - shark duoclean Powered Lift-Away NV830 Serie Instructions

CLEANING THE SOFT ROLLER

1
Slide the Soft Roller Access Button up to
remove the Soft Roller.
2 Use scissors to remove any string, carpet
fibers or hair that may be wrapped around
the Soft Roller. You can also tap loose
debris off the Soft Roller, or wipe it clean
with a dry towel. If you see any fibers or hair
buildup in the teeth behind the Soft Roller,
take a dry towel and wipe it away.
3 Wash the Soft Roller as needed. Use only
water, and let air-dry completely for at least
24 hours.
4 Reinsert the Soft Roller by sliding it into the
front of the nozzle until it clicks into place.

CHECKING THE NOZZLE FOR BLOCKAGES

1
Tilt neck of nozzle back to straighten the
airway, then remove any blockages from
nozzle.
s h a r kc l e a n . c o m
20