Identifying Parts And Controls - Sony GDM-5403 Mode D'emploi

Identifying parts and controls

See the pages in parentheses for further details.
Front
1 2
1 0 1 0 (reset) button (page 14)
1 1 0 0
This button resets the adjustments to the factory settings.
2 2 2 2
ASC (auto sizing and centering) button (page 7)
This button automatically adjusts the size and centering of the
picture.
3 3 (brightness) m/M buttons (page 9)
3 3

   

 
  
    mM     !    "
4 4
4 4
(menu) button (page 9)
This button displays the main menu.
5 5 6 6 6 6 (contrast) </, buttons (page 9) 5 5
These buttons display the BRIGHTNESS/CONTRAST menu
and function as the </, buttons when making adjustments.
6 1 (power) switch and indicator (pages 6, 14, 18) 6
6 6
This button turns the monitor on and off. The power indicator
lights up in green when the monitor is turned on, and either
flashes in green and orange, or lights up in orange when the
monitor is in power saving mode.
Rear
AC IN
(HD15)
1
7 7 AC IN connector (page 6)
7 7
This connector provides AC power to the monitor.
8 Video input connector (HD15) (y 8 8 8
This connector inputs RGB video signals (0.700 Vp-p,
positive) and sync signals.
5 4 3 2 1
10 9
15 14 13
Pin No. Signal
1 Red
2 Green
(Sync on Green)
3 Blue
4 ID (Ground)
5 DDC Ground*
6 Red Ground
7 Green Ground
8 Blue Ground
9 DDC + 5V*
10 Ground
11 ID (Ground)
12 Bi-Directional Data (SDA)*
13 H. Sync
14 V. Sync
15 Data Clock (SCL)*
* DDC (Display Data Channel) is a standard of VESA.
y y 1) (page 6) y
8 7 6
12 11
5
GB