Assembling The Trap - Biogents BG-Mosquitaire CO2 Manuel D'instruction

Assembling the Trap

1. Remove the BG-Sweetscent dispenser (12) from the
packaging [F1] and place it into the designated slot
located on the inside wall of the inner tube (8) [F2].
2. Place the funnel net (2) around the bottom of the intake
funnel (1) [F3]. Then place the catch bag (3) over the
funnel net. The funnel net is now located inside the
catch bag [F4].
3. Insert the intake funnel with the attached funnel net and
catch bag [F4] into the opening on top of the trap [F5].
4. Plug the bottom of the CO
respective wholes in the lid of the trap [F6].
emitter nozzle (10) into the
2
BG-Sweetscent
F1
1
2
F3
F5a
F2
1
2
3
F4
F5b
F6
EN 47