Assembling The Trap - Biogents BG-Mosquitito Manuel D'instruction

Contents included in the packaging
1. Plastic intake funnel with ventilator
2. BG-Mosquitito™ trap body with pouch inside for
the BG-Sweetscent dispenser
3. Biogents Sweetscent™ (BG-Sweetscent™)
4. Power supply unit with 8m cable
5. String to hang the trap (2.5 m)

Assembling the trap

1. Open the BG-Sweetscent package and remove
the white BG-Sweetscent pouch [F1]. Place the
BG-Sweetscent into the pouch located inside the
trap body [F2].
2. Attach the black string to the intake funnel by in-
serting the end of the string into the hole on the
top rim of the intake funnel [F3] and then tying a
double knot in the string [F4]. Do the same with
the other side.
3. Insert the intake funnel into the trap body by
placing one corner of the intake funnel and ven-
tilator in after another [F5]. The power cord from
the ventilator can come out of the bottom or top
of the trap when inserting the intake funnel [F6].
4. Make sure the white seam of the middle opening
is placed in between the intake funnel and the
ventilator [F7].
F7
F1
F3
F5
EN
1
2
3
4
5
F2
F4
F6
3