INSTALLATION
(*) Classified "hazardous voltage" according to EN60950
standard.
Electrical connection: The apparatus is designed to
operate from a 230V 50Hz supply only. (Classified as
'hazardous voltage" according to EN60950 standard).
The apparatus does not incorporate an integral power
on/off switch. To disconnect the power, either switch off
supply at the mains power socket or unplug the AC
adaptor. When installing the apparatus, ensure that the
mains power socket is readily accessible.
Telephone connection: Voltages present on the
telecommunication
network
are
classified
TNV-3
(Telecommunication Network Voltage) according to the
EN60950 standard.
4