6.3 Assembly
WARNING! Danger of tripping over!
!
On the back of the Oxyderme THBO oxygen concentrator by Kröber you will find
a winding device for the mains lead.
This should be used when the unit is out of use, to avoid any danger of tripping
over.
Insert the power cable plug into a professionally
grounded socket.
ATTENTION!
The Oxyderme THBO oxygen concentrator by
Kröber is only designed for operation on a
230 Volt, 50Hz electric network.
Connect the oxygen hose to the outlet
connector on one side and to the diffusers
on the other side.
Then connect the whole to the oxygen outlet
of the concentrator.
Connect the hyaluronic acid hose to the outlet
connector on one side and to the qOartz
diffuser on the other side.
Then connect the whole to the oxygen outlet
of the concentrator.
15
Oxyderme THBO