Transport, Packaging And Storage; Transport Inspection; Storage - Kröber OXYDERME THBO Manuel D'utilisation

Oxyderme THBO

5. Transport, packaging and storage

The following should be noted when transporting the Oxyderme THBO
oxygen concentrator by Kröber:
- The unit should only be shipped and transported in its original packaging.
- For transport, e.g. by car, the unit may stand upright or lay on one of the
two large flat sides.
- Open the transport box from the top. Do not stand the transport carton
upside down or on one of its narrow sides.

5.1 Transport inspection

It is highly recommended to check the complete delivery for completeness
and possible transport damage, immediately after receipt.
In case of externally detectable transport damage you should not accept the
delivery, or only with reservation. Acknowledge the receipt only with reserva-
tion (e.g. on the freight document). Specify the expected damage and inform
the manufacturer immediately.
Hidden damage should be claimed immediately after detection, because
damage claims can only be lodged within the applicable claims periods.
The packaging material should be saved, it may be needed if the unit has to
be returned.

5.2 Storage

If the package is to be stored before it is taken into service, please observe
the following instructions:
- Store in a dry environment. Relative humidity: max. 93 % without conden-
sation.
- It must be assured that the package is not stored outdoors. It must also be
assured that the floor used for storage is dry over the entire storage period.
- Storage temperature -25 to +70°C.
- Store in a dust-free environment.
- Avoid mechanical shocks and damages.
13