Fein ASCD12-100W4 Mode D'emploi page 11

OBJ_BUCH-0000000394-001.book Page 11 Friday, January 10, 2020 9:27 AM
Symbol, character Explanation
Low speed
High speed
Caution: Do not look or stare into the switched-on lamp!
Torque gradient for applications with hard backing, e. g., screws with
nuts and washers (dependent of screw diameter and strength)
Torque gradient for resilient applications, e. g., wheel rims, spring
washers, disc springs, stud bolts, extensions
Torque gradient for applications with soft backing, e.g., wood (depen-
dent of screw diameter and length), lead or fibre discs
* The power tool can additionally be operated with deviating perfor-
mance data in the 12 V and 14.4 V voltage classes.
(**) may contain numbers and letters
*** Partially in delivery scope
(Ax – Zx) Marking for internal purposes
Character Unit of measurement,
national
n rpm; /min; min
0
P W
°
U
V
f
Hz
I
A
m
kg, lbs
l
ft, in
Ø ft, in
K...
2
m/s
m, s, kg, A, mm, V, W,
Hz, N, °C, dB, min, m/s
Explanation
-1
; r/min No-load speed (with fully charged battery)
Electrical power
Angle width
Electric voltage
Frequency
Electric current intensity
Mass
Length, width, height, depth, diameter or thread
Diameter of a round part
Uncertainty
Vibrational emission value according to EN 62841
(vector sum of three directions)
Basic and derived units of measurement from the
2
international system of units SI.
en
11