Panasonic TH-47LFV5W Mode D'emploi page 9

,QSXW2XWSXW 7HUPLQDOV
AC IN
1
Connect the supplied power cord to the wall outlet.
0$,1 32:(5 6:,7&+
2
Press to switch the main power on/off.
,5 75$160,77(5 ,1  287
3
Reserved for the wired connection of the IR control.
NOTE: If an optional IR receiver is connected to [IR
75$160,77(5 ,1], this Display's remote control
sensor will stop working.
6(5,$/ 287  6(5,$/ ,1
4
RS232C network input/output connection for the use of
loop-through function.
LAN
5
LAN control function for the use of remote control signal
from control center.
+'0, $9 ,1
6
Input the HDMI source of an AV device, or the DVI-D
output of a PC by using a DVI-HDMI cable.
'9,' ,1  '9,, 287
7
Digital video input and output connection.
3 4
5 6
7
3& ,1
8
Input the PC source.
AUDIO IN 1
9
Input the PC audio source (3.5 mm stereo phone jack).
&20321(179,'(2 ,1 %1&
10
Input the component YPbPr source from external AV
device.
For VIDEO input, connect with CVBS cable from the video
output of your AV device to this Display's Y input (an after-
market BNC-RCA adapter will be needed).
$8',2 ,1  5&$
11
Input the audio source from external AV device.
$8',2 287 5&$
12
Output the audio source connected from the AUDIO IN
jack to an external AV device.
63($.(5 287 5/ ! (;7 63 
13
Output the audio to your external speakers.



8 9

9