Cleaning And Maintenance - Bestron ACM8007BE Mode D'emploi

3. Put one or two cups under the spouts. If you would like to brew one cup off coffee, place the cup in the
middle.
4. Put the required quantity of ground coffee into the permanent filter. Distribute the coffee evenly.
5. Put the plug in the wall socket and switch on the appliance by using the On/Off-switch. The indicator
light will now illuminate.
6. Switch off the appliance only once cups are filled with the last drops of coffee. The indicator light will
extinguish when the switch is set to the '0' position.
7. Remove the plug from the wall socket.
ATTENTION:
• The appliance will not keep the coffee in the cup warm.
• Allow the appliance to cool down before using it to brew additional coffee!
• After 15 minutes the coffee maker will switch off automatically. If you wish to brew coffee after this has
happened, set the switch to '0' before setting it '1'.

CLEANING AND MAINTENANCE

1. Switch off the appliance, take the plug out of the socket, and allow the coffee maker to cool.
2. Clean the outside of the appliance with a damp cloth and washing-up liquid, and then dry it thoroughly.
Make sure no moisture gets into the appliance.
3. Wash the permanent filter in hot water with washing-up liquid. Rinse the filter with ample clean water,
and then dry it thoroughly.
ATTENTION:
• Never immerse the coffee maker, the plug or the cable in water. Never put the appliance in a
dishwasher. Only the permanent filter may be immersed in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
CLEANING AND MAINTENANCE - Descaling
Limescale can reduce the efficiency of your coffee maker. Limescale is common in areas with hard water.
We advise the use of a suitable descaling agent to remove any scale. Always follow the instructions for the
descaling agent. The amount of scale will be reduced when you use a water softener.
25
EN