Cleaning And Maintenance - Bestron ACM200RE Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
OPERATION - Making coffee
1. Open the lid (6) of the water reservoir (7) and fill the reservoir sufficiently, at least for 4 cups and
maximally for 12 cups.
2. Fill the filter with the desired quantity of ground coffee (standard 1 level scoop per cup). This coffee
machine has a permanent filter (1). You do not have to use a paper filter, but it is possible to place a
filter bag (1x4) in the filter holder.
3. Close the lid.
4. Place the glass coffee pot (5) on the hot plate (8).
5. Pressing the strength button (14, the coffee can be made stronger. The orange indication light burns
(16) when stronger coffee is selected.
6. Press the on/off button (9) once to start making coffee. The coffee is prepared. Indication light (17)
turns orange.
ATTENTION:
Because of the drip stop, you can have coffee when you want. Quickly put the pot back to prevent
overflow of the filter.
The lid of the machine is hot when the machine is in operation! Be careful when opening the lid during
operation. Hot steam can cause burns.
The machine will automatically turn off after 40 minutes.
Do not place a paper filter in the permanent filter. First remove the permanent filter from the filter
holder.
OPERATION - Programming coffee machine for a later moment
When you have set the coffee machine to the right time, you can program the coffee machine to make coffee
at a later moment.
1. Press the programming button (11).
2. Set the time you want the coffee to be made with the hour and the minute buttons. Press the hour button
(12) to set the right hour. Press the minute button (13) to set the right minutes.
3. Press the delay brew button (10).
4. The machine will turn on at the set time and the indication light (17) will turn green.
ATTENTION:
The machine remembers the delayed start setting. If you want to use the function again, you only have
to press the delay brew button. Attention: do not forget to refill water and coffee. Coffee on another
moment? Repeat step 1 to 4.

CLEANING AND MAINTENANCE

1. Pull the plug from the socket and let the machine cool down if necessary.
2. Remove the filter holder from the device and clean under flowing water.
3. Clean the coffee pot with warm water with detergent or in the dishwasher.
4. Clean the device on the outside with a moist cloth a detergent. Make sure no moisture enters the
machine.
ATTENTION:
Dry the inside of the machine after use. This extends the longevity of the machine.
Never immerse the machine, plug, and cable in water. Never put the machine in a dishwasher. Only
separate component may be immersed in water.
Do not use aggressive of abrasive cleaning agents or sharp objects (such as knives or hard brushes)
when cleaning.
CLEANING AND MAINTENANCE - Decalcification
Scale can reduce the performance of the machine. In areas with hard water, scale often occurs. We advise
to use a suitable descaling agent if scale occurs. Always follow the instructions of the descaling agent.
Scaling occurs less if you use a water purification device.
25
EN

Publicité

Table des Matières
loading

Table des Matières