Mounting Instructions; Electrical Installation - WAHLBACH 18kW, 21kW, 24kW Instructions De Montage Et D'utilisation

DE GB NL FR

2. MOUNTING INSTRUCTIONS

Electrical installation

This unit may only be connected to a fixed cable.
It should be possible to isolate the device from the mains supply on all
poles by fuses or other means which provide a gap of at least 3mm!
This unit requires a 400V, three-phase supply. If the electrical installation
does not meet these requirements then it will need to be modified. This
should be done by a qualified electrical installer, in accordance with the
relevant regulations (IEEE, etc.).
The electrical connection should be made by a qualified electrical in-
staller, in accordance with the relevant regulations (IEEE, etc.).
The device has been prepared for connection to the electrical supply.
This appliance should be earthed.
Unpacking
Check if the device has been damaged in any way.
Contents
• 1 device (Digital 18, 21 or 24kW)
• 1 mounting template
• 1 bag of installation materials, contents:







4x
4x 4x
  
16
4 plugs
4 screws
4 spacers
1 nipple
1 stop valve
4 gaskets
1 universal mounting plate
1x
1x
 
1x

4x
