Declaration Of Conformity; Standards And Regulations; Connection To The Water Supply - WAHLBACH 18kW, 21kW, 24kW Instructions De Montage Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved.
Children shall not play with the appliance. Cleaning and user mainte-
nance shall not be made by children without supervision.

Declaration of conformity

Wahlbach hereby declares that the Wahlbach device complies with the directives and
standards:
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility Directive
2011/65/EC (RoHS II)
2009/125/EC Ecodesign
(EC) No. 814/2013
And also comply with the provisions of the following European Standards:
EN 62233:2008 + C1:2008
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 60335-1:2012 + AII:2014 + A13:2017
EN 60335-2-35:2016
EN 55014-1:2017
EN 55014-2:2015
Wahlbach, De Overmaat 78, 6831 AJ Arnhem, The Netherlands, 2019-06-01

Standards and regulations

The installation (plumbing and electrical work), commissioning and
maintenance of this appliance should only be undertaken by personnel
with electrical engineering qualifications and in accordance with the rel-
evant standards and regulations (BSI, etc.) and this manual.
Correct and reliable operation of this unit will only be ensured if the original accessories and
spare parts are used. The following should be observed:
DIN VDE 0100: Requirements of your electricity supplier.
DIN 1988 / DIN 4109: Requirements of your water supplier.
The following should also be observed:
the appliance name plate;
the technical specifications.

Connection to the water supply

Compatible cold water pipe materials: steel, copper and plastic.
Operating conditions to DIN 1988, Part 2, December 1988, Section 2.2.3, Table 1. There is
no need to install a relief valve.
Compatible hot water pipe materials: copper, approved plastic piping systems. During normal
operations and fault conditions, the operating conditions to DIN 1988, Part 2, December
1988, Section 2.2.3, Table 1 apply.
This device should be permanently connected to the water mains and cannot be connected
by a hose-set.
DE GB NL FR
15

Publicité

Table des Matières
loading

Table des Matières