Glem GFMC530IX Manuel D'utilisation Et D'entretien page 24

USING THE ELECTRONIC PROGRAMMER (pic. 8)
Pic. 8
A
Temperature
B
Automatic programme
C
Duration and manual mode
D
Minute minder
Setting the clock
Switch the oven on; 00.00 will appear in blinking mode on the display.
the display. To set the clock, simultaneously press the duration
and end of cooking
select the time of day required. With the key "+" the time increases,
with the key "-" the time decreases at a speed directly proportional to
the duration of the pressure exerted on the key. When the time is stored,
the point between the hours and the minutes will stop blinking
approximately 7 seconds after the last operation. To update the
time, repeat the operation.
Manual operation
Press duration
program is on the "AUTO" symbol (B) will be erased, the pot
symbol (C) is illuminated. Any programme which has been previously
set is cancelled.
20
20
keys together. Using the +/- keys on the right,
and end time button
Timer
F
U
N
C
Cooking duration time
T
I
O
Cooking end time
N
Minus setting
Plus setting
together. If an automatic