Machine Maintenance; After Each Use - Tennant E5 Manuel Opérateur

OPERATION
EN

MACHINE MAINTENANCE

To keep the machine in good working condition, simply
follow the machine's maintenance procedures.
FOR SAFETY: Before performing maintenance
procedures turn off machine and unplug power
cord from wall outlet.
ATTENTION: Contact an Authorized Service Center
for machine repairs.

AFTER EACH USE

1. Wipe clean the power cord and inspect it for
damage (Figure 23). Wrap power cord around
handle and cord hook when not in use (Figure 24).
FIG. 23
WARNING: Electrical Hazard, Do Not Operate
With Damaged Power Cord.
If the power cord is damaged or broken, it must be
replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a
hazard.
2. Empty the recovery and solution tanks and
thoroughly rinse with clean water (Figure 25).
FIG. 25
10
FIG. 24
3. Clean the vacuum shut- off float (Figure 26) and
the vacuum intake screen of any debris buildup
(Figure 27).
FIG. 26
4. Clean the solution hose screen (Figure 28).
FIG. 28
5. Clean the brush of any debris, string, hair or carpet
fibers (Figure 29). Clean the underside of the brush
base (Figure 30).
FOR SAFETY: Before tipping machine back,
unplug power cord from wall outlet.
FIG. 29
FIG. 27
FIG. 30
Tennant E5 (03- 08)