These INsTRucTIoNs are for experienced operators. If you are not fully familiar with the
principles of operation and safe practices for arc welding and cutting equipment, we urge
you to read our booklet, "Precautions and safe Practices for arc Welding, cutting, and
gouging," Form 52-529. Do NoT permit untrained persons to install, operate, or maintain
this equipment. Do NoT attempt to install or operate this equipment until you have read
and fully understand these instructions. If you do not fully understand these instructions,
contact your supplier for further information. Be sure to read the safety Precautions be-
fore installing or operating this equipment.
This equipment will perform in conformity with the description thereof contained in this manual and accompa-
nying labels and/or inserts when installed, operated, maintained and repaired in accordance with the instruc-
tions provided. This equipment must be checked periodically. Malfunctioning or poorly maintained equipment
should not be used. Parts that are broken, missing, worn, distorted or contaminated should be replaced imme-
diately. Should such repair or replacement become necessary, the manufacturer recommends that a telephone
or written request for service advice be made to the Authorized Distributor from whom it was purchased.
This equipment or any of its parts should not be altered without the prior written approval of the manufacturer.
The user of this equipment shall have the sole responsibility for any malfunction which results from improper
use, faulty maintenance, damage, improper repair or alteration by anyone other than the manufacturer or a ser-
vice facility designated by the manufacturer.
REaD aND uNDERsTaND ThE INsTRucTIoN MaNual BEFoRE INsTallINg oR oPERaTINg.
BE suRE ThIs INFoRMaTIoN REachEs ThE oPERaToR.
You caN gET ExTRa coPIEs ThRough YouR suPPlIER.
cauTIoN
usER REsPoNsIBIlITY
PRoTEcT YouRsElF aND oThERs!
6