Disassembly / Assembly Of Torch - ESAB PT-38 Manuel D'instructions
Masquer les pouces
Voir aussi pour PT-38:
- Manuel d'instruction (404 pages) ,
- Manuel d'instructions (20 pages) ,
- Manuel d'instructions (36 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
sEcTIoN 5
WaRNINg
5.3
Disassembly / assembly of Torch
1.
Remove eight phillips head screws from handle. Separate the two halves of the handle assembly. Be
careful not to lose the trigger spring when removing torch body assembly.
BEFoRE aNY MaINTENaNcE Is aTTEMPTED oN ThIs ToRch, MaKE
suRE ThE PoWER sWITch oN ThE coNsolE Is IN ThE "oFF" PosITIoN
aND ThE PRIMaRY INPuT Is DEENERgIZED.
Handle Assembly
56
MaINTENaNcE
Torch Head Assembly
Publicité
Table des Matières
