Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PVC Conduit Run
Install Schedule 40 electrical conduit from the desired installation location of the light, back to the
transformer. For ease in pulling the ColorLogic/CrystaLogic's cable, use long sweeps only (no more
than 3), no 90º elbows. Finish the run before installing the light. Do not attempt to glue PVC or fittings
while routing the cable.
Install the LED Light into PVC conduit
With the PVC conduit secure in the pool wall, follow these steps to secure the light:
1)
Run the ColorLogic/CrystaLogic 1.5" LED light cord through the conduit to the transformer or
junction box location.
2)
Insert the ColorLogic/CrystaLogic 1.5" LED light fully into the conduit as shown. IMPORTANT:
Do not use silicone or any other type of sealant.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
INSIDE POOL
4
Publicité
Chapitres
Table des Matières
Dépannage
