Ermax 7704025 Notice De Montage page 2

F ittin g kit
U U U
- 4 self-tapping screws.
- 2 beleved spacers.
A ssembly
U
- Remove the saddle.
- Remove the passenger handles, then the side panels of the saddle and the rear lights protection.
- Disconnect the indicators and the rear plate lighting.
- Cut away the internal mud guard of six cm on the lighting support.
- Fix the undertray by having before hand drilling the ∅ 10 mm fixation holes corresponding to
those of the streamlining.
- Replace both the side panels and the rear light protection.
- Add the furnished screws on both side of the streamlining at the level of the two brackets being
under the streamlining.
- Rivet the license plate on the support foreseen for that purpose.
- If necessary, fix the plate with the supplied beleved spacers.
* Painted and varnished parts are not guaranteed against high pressure steam washes or aggressive cleaning products which can damage them and unstuck the varnish. We advise moreover, according to the technical data
of our painting suppliers, to wait one month to obtain a complete polymerization of varnish.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* Any deterioration of the parts due to the presence of any excessive load in the undertray will not be guaranteed.
* A few tyres, as Dunlop D207 or Michelin Pilot Power, not being for the given dimensions, are not compatible with undertray and rear hugger made for original tyres in standard dimensions.
* Harden the rear shock absorber while drivings with load or on dented roads.
* The "Ermax" mudguard and undertray are compatible.
GSF 1200 BANDIT 1996/2000
« CAUTION »
U
F ITTING INSTRUCTIONS
U
« UNDERTRAY »
U
GSF 600 BANDIT 1995/1999
O riginal tyre in 160.
U