Step 2. Accessing The Power Cord Connection - Samsung NE63 8 Serie Manuel D'installation

Connecting the power

Step 2. Accessing the power cord connection

Loosen and then remove the rear access cover screw with a screwdriver. Remove
the rear access cover by pull right and then out. The terminal block will then be
accessible.
Terminal block
Access cover
8 English
Install_NE63T8911_AA_DG68-01257A-00_EN.indd 8
Specified rating of power-supply-cord kit and circuit protection
Specified rating
Range rating, watts
of power-supply-
cord kit and
120/240 volts 120/208 volts
circuit protection,
3-wire 3-wire
8750-16500 7801-12500 40 or 50 A
This appliance must be supplied with the proper voltage at the proper frequency
and must be connected to a dedicated, properly grounded branch circuit protected
by a 40 amp or larger circuit breaker.
NOTE
For power cord installations, go to Step 3. For conduit installations, go to Step 4 on
page 11.
Diameter (inches) of range
connection opening
Power cord Conduit
Amps
1 3 ⁄ " 1 1 ⁄ "
8 8
3/19/2020 4:15:01 PM