Samsung NE63 8 Serie Manuel D'installation page 14

Installing the range
1. Install the bracket using the template
The Anti-Tip bracket is packaged with a template. The instructions include
information necessary to complete the installation. Read and follow the
instructions on the sheet (template) for range installation.
2. Level the range
Level the range by adjusting the leveling legs with a wrench.
Raise range
Lower range
Leveling leg
14 English
Install_NE63T8911_AA_DG68-01257A-00_EN.indd 14
3. Check your adjustments
Use a spirit level to check your adjustments. Place the level diagonally on the oven
rack or surface cooktop, and confirm the range is level in the two directions shown
below.
1. Check direction 1.
2. Check direction 2.
If the spirit level indicates that the range is not level, adjust the leveling legs with
a wrench.
For your safety, do not attempt to modify
or straighten front legs. Front leveling legs
on the range are designed to be slanted to
prevent accidental tipping.
Ground
CAUTION
3/19/2020 4:15:03 PM