Technical Features - TECHNO-GAZ Hydra Electronic Mode D'emploi

3. TECHNICAL FEATURES

Use room temperature
Device dimensions (X,Y,Z)
Opened door overall dimensions
Weight with empty device tanks
Weight with full device tanks
Device furniture colour
Material making up the device furniture
Furniture temperature after 1 working hour
Sound intensity level
Package overall dimensions ( X,Y,Z )
Supplying voltage
Number of phases
Supplying frequency
Max. absorbed power
Type of protection
Insulation class
Length of the supplying cable L=2200mm
Fuses (6.3X32)
Electrical connector (pin)
MAX. using pressure
Capacity of the filling tank
Material making up the filling tank
No. of cycles which can be carried out with completely full tank
Minimum water load to ensure a sterilisation cycle
Features of the water to be used
Dimensions of the sterilisation chamber
Material making up the sterilisation chamber
Material
Number of supplied tray-holders
Tray-holder dimensions (X;Y;Z)
Material
Number of supplied trays
Tray dimensions (X;Y;Z)
X = WIDTH Y = HEIGHT Z = DEPTH
DEVICE MECHANICAL FEATURES
DEVICE ELECTRICAL FEATURES
DEVICE PNEUMATIC FEATURES
FEATURES OF THE FILLING AND DISCHARGE TANK
FEATURES OF THE STERILIZATION CHAMBER
FEATURES OF THE SUPPLIED TRAY-HOLDERS
FETAURES OF THE SUPPLIED TRAY
+5°C ÷ +40° C
442mm,385mm,500mm
380 mm
30 Kg
35 Kg
RAL 9016
Steel Fe370
(50÷55)°C
50 dB
530 x 510 x 590 mm
230 V±10% AC
1
50/60 Hz
2000 W
PE
1
2x1.5mm² + EARTH
12A delayed
SCHUKO 16A+EARTH
2.2 bar
2.2 litres
High density polyethylene
5÷7 according to the instrument load
20 cm³
Demineralized or distilled
Ø 243 X 320 mm
INOX AISI 304
Anodized aluminium
1
(192 X 165 X 280) mm
Anodized aluminium
4
(184 x 17 x 280) mm
13