Celestron 44430 Manuel D'instructions page 6

r M
eVIewIng and anagIng
You can review and manage your snapshots and videos on the
LCD Monitor that are saved in the internal storage memory.
1. By pushing the ESC Key, you enter the stored images (Picture
View). Use the directional keys to select the image you want to
view and press the OK Key to view with full screen. Thumbnail
images appear on the left half of the screen (as you scroll
through the images on the right) and the images are listed by
number on the right side of the screen for ease of selection.
To review your videos while in the stored images, press MENU
and then select the video you want to review. Push OK to
start and stop the video. Press ESC to exit the video. When
observing an image with full screen view, you can return to
t Y
ranSferrIng our
To transfer images to a PC or MAC, you need to have a free USB
port and have an imaging program (for snapshots and/ or video).
Turn the power Off of the LCD Screen.
Note: Do not disconnect the USB cable while transferring
images or damage may occur.
1. You can transfer images from the internal storage memory
to your PC by using the supplied Mini USB Cable (located
in a pullout drawer of the case). The small plug end of the
cable plugs into the LCD Monitor and the large plug end of
the cable plugs into your PC. Turn the power On of the LCD
screen. If the connections are proper you will see on
V I o
IewIng MageS
Video cables are supplied (in the drawer of the case). Plug one
end of the video cable (red and white connectors) into the TV
set "Video In" and "Audio In" sockets. Plug the other end of the
cable (black) into a socket on the side of the LCD Monitor labeled
"Video Out". Press MENU and then select "TV Output" and
Y I
our MageS
I
MageS
tV S
n a creen
the stored images by pushing the ESC Key. To exit to real time
(snapshot mode), push the ESC Key again.
2. You can manage your images by pushing the MENU Key:
A. File Protect – you can make selections by pushing the OK
Key. You have a choice of "Lock" to protect this image or
"Unlock" where the image is not protected.
B. Del File – if you want to delete one or more images you
can select "Current" to delete the image you are viewing
or you can select "All" to delete all of your images.
C. Exit – select this to return to the "Picture View" screen.
the LCD screen "MSDC" or similar data. Your PC will
automatically recognize the new hardware. Then, you will
choose which program on your PC you want to transfer the
images to – you may have to choose a different snapshot
program and a different video program depending on what
software imaging programs you have.
2. If you used an SD card to store your images, you can transfer
them to your PC using the method in # 1 above or you can
take the SD card out and use the SD card slot on your PC (if
available) to transfer the images. In either way your PC will
ask you to choose which program you want to transfer the
images to.
choose LCD Output, NTSE Output, or PAL Output. The image
as seen on your LCD screen (in the Preview mode) will now be
viewable on your TV screen. The image on the TV screen will be
greatly enlarged and not as sharp in color or contrast as the LCD
screen due to the resolution of the TV screen.
6